Epson Stylus Pro 7700 User's Guide - Page 176
Checking Error Messages and Lights, Solving Problems
View all Epson Stylus Pro 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
176 | Solving Problems Checking Error Messages and Lights The control panel includes various lights and an LCD display to indicate the status of the printer: Paper Ink light light Paper feed up button Print head cleaning button Paper release (ePlaten) light and button power light and button OK button Menu button Pause/reset light and button Ink open button Paper cut button Paper feed down button LCD display Left arrow or paper source button When your paper runs out, ink is low, or a problem occurs, a message appears on the LCD display, and the lights on the control panel come on or flash. The following table lists the messages in alphabetical order and includes an explanation and instructions for correcting the problem. Message Explanation Response BORDERLESS ERROR LOAD A SUPPORTED PAPER SIZE OR LOAD PAPER CORRECTLY The borderless setting is selected and paper that doesn't support borderless printing is loaded. The sheet size is not recognized. Press to cancel the print job. Change the setting in the printer driver or load different paper. Make sure the paper is flat. Paper is not loaded correctly. Make sure paper is loaded correctly. CALL FOR SERVICE An error has occurred. The number 3000 indicates that the power cord is not connected correctly. Note the error number, then turn the printer off. Then check the power cord connection at both ends and turn it back on. If the message remains after restarting the printer several times, contact your service provider as described on page 13. CANNOT OPEN INK COVER Something is obstructing the indicated ink cover. Remove the obstruction and press the button again. 176