Epson Stylus Pro 7700 User's Guide - Page 83
seconds after each pass to allow ink to dry on - driver windows 10
View all Epson Stylus Pro 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Handling Paper and Other Media | 83 8. Examine the printed pattern for the most evenly overlapping lines. Choose the number with the most even lines. In the example shown above, the lines under number 4 are the most even. After printing the pattern, THICKNESS NUMBER is highlighted. 9. Press u or d to select the number that you noted in step 8, then press OK. 10. Press l, then d to select any of the menu options shown below. Make adjustments as needed, and press OK to save each setting. Then press l to return to the menu. You can also make similar settings using the printer driver software. For instructions, see page 100 (Windows) or page 132 (Mac OS X). • PAPER FEED ADJUST helps eliminate banding. Choose a lower value if you see white lines on your prints, or a higher value if you see dark lines. • DRYING TIME lets you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 10 seconds after each pass to allow ink to dry on the page. • PAPER SUCTION lets you decrease the paper suction level when printing on thin media (under 12 lb), such as drafting paper or backlight film. • SET ROLL PAPER TENSION lets you adjust the tension to HIGH or HIGHER for cloth or thin paper, or if the paper wrinkles during printing. • REMOVE SKEW helps reduce paper skew for very thin media or film. 11. When done, press . After you create paper configurations, you can use the TEST PRINT menu to print out a list of paper numbers showing the settings for each one. 83