Epson Stylus Pro GS6000 Setup and User's Guide - Page 101
Solving Problems, The following table lists the messages in alphabetical order and includes an - printer inks
View all Epson Stylus Pro GS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Solving Problems | 101 The following table lists the messages in alphabetical order and includes an explanation and instructions for correcting the problem. Message Explanation Response CARRIAGE LOCKED The print head is locked. RELEASE THE CARRIAGE LOCK Remove the bracket securing the print head; see page 27. COMMAND ERROR CHECK DRIVER SETTINGS You may be using the wrong printer driver. Damaged data was sent to the printer or the data has an incorrect command. Press and hold the Pause button for three seconds to cancel the print job. Make sure you installed the correct driver for your printer. DRAIN TANK FULL The waste ink tank is full. DRAIN WASTE INK FROM THE DRAIN TANK Dispose of the waste ink in the waste ink tank. See page 78 for instructions. FRONT COVER OPEN Front cover is open. Close the front cover. CLOSE FRONT COVER F/W INSTALL ERROR UPDATE FAILED RESTART THE PRINTER Firmware update failed. Restart the printer, then update the firmware again; see page 38 for instructions. INK CARTRIDGE NON-GENUINE CARTRIDGE MAY NOT PERFORM AT OPTIMUM. CONTINUE? A non-genuine ink cartridge is installed. Press the r button to select NO and replace the ink cartridge with a genuine Epson ink cartridge; see page 75. Otherwise, press l to select YES. INK CARTRIDGE PLEASE USE GENUINE EPSON INK CARTRIDGES A non-genuine ink cartridge is installed. Replace the ink cartridge with a genuine Epson ink cartridge; see page 75. INK CARTRIDGE REPLACE INK CARTRIDGE Ink cartridge(s) are expended (printing stops). Replace the ink cartridge(s) indicated on the LCD display; see page 75. INK CARTRIDGE DO YOU ACCEPT THIS? A non-Epson ink cartridge is installed. Press the r button to select DECLINE and replace the ink cartridge with a genuine Epson ink cartridge; see page 75. Pressing l to select ACCEPT may cause damage not covered by your warranty. 101