Epson Stylus Pro GS6000 Setup and User's Guide - Page 37
Installing Your Software, Connecting to Your System
View all Epson Stylus Pro GS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting Up the Printer | 37 Installing Your Software Follow the instructions in the DVD package that came with your printer to install the software included on the DVD. Connecting to Your System You can use USB and/or Ethernet network connections. For USB connection, make sure your system has the appropriate port and you have a standard, shielded cable 10 feet (6 m) long or less. Do not connect the printer until a software installation screen prompts you to. To connect to a network hub, you need a standard RJ-45 CAT-6 network cable. To connect directly to your computer's network interface, you need an RJ-45 CAT-6 crossover cable. 1. Plug the interface cable into the appropriate port on the printer. USB connection Network connection 2. Plug the other end of the cable into the appropriate connector on your computer, or network switch or hub. 3. Route the interface cable through the lower cable support on the printer stand along with the power cords, as shown on page 31. 37