Epson SureColor P20000 User Manual - Page 202
Media Type, Optimize media edge print quality, Paper Feed Stabilizer, Parent topic, Related concepts
View all Epson SureColor P20000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
• Shake the cartridges before installing them in the printer. To maintain optimum print quality, remove and shake the installed cartridges every three months. • Make sure you selected the correct Media Type setting in the printer driver that matches the paper loaded in the printer. • Compare the print result with the image on your computer screen. Since monitors and printers produce colors differently, printed colors and screen colors do not always look the same. • Make sure that the front cover is closed during printing. • Check the ink levels on the LCD screen. Replace any cartridges that are low on ink. • Enable color management in the software application or in the printer driver. • If you are using non-Epson media, make sure you created a custom paper configuration for the media. • Check the quality setting that you selected in the printer driver. Using a faster printing method may decrease the overall print quality. • If you are printing on roll paper, cut approximately 3 inches (76 mm) off the end of the roll. Because the leading edge is in contact with the air, the paper quality may decline over time. • Enable the Optimize media edge print quality setting in the printer driver. • Check the paper feed sensor. If the sensor is dirty, clean it. • Make sure the Paper Feed Stabilizer setting on the LCD screen is set to On. Parent topic: Solving Print Quality Problems Related concepts Print Head Nozzle Check Print Head Cleaning Print Head Alignment Purchase Epson Ink Cartridges and Maintenance Boxes Related references Print Quality Options - Windows Color Management Options - Windows Output Resolution Settings - OS X Advanced Color Settings - OS X Related tasks Removing and Installing Ink Cartridges Selecting Basic Print Settings - Windows 202