Epson SureColor S30670 User Manual - Page 14
Back
View all Epson SureColor S30670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Back 1 Drive switch The drive switch is used to feed the media during loading and to rewind the media for replacement. 2 Roll holder Place media on these holders. There are two holders: one on the left and one on the right. 3 Roll holder fixing screw These screws fix the roll holders in place once the media has been installed. There are two screws: one on the left and one on the right. 4 Lift lever If the media to be mounted on the roll holders seems heavy, use these levers to raise the media effortlessly to the level of the roll holders. There are two lift levers: one on the left and one on the right. 5 Pre-heater Heats the media before printing so that the print area is not subject to sudden changes in temperature. 6 Roll support Rest media on these supports before placing it on the roll holders. There are two supports: one on the left and one on the right. 7 Handle After placing media on the right roll holder, rotate the handle to press the holder and apply pressure to the roll core. Introduction 14