Epson T-1000 User Manual - Page 83
#8143 New Serial Interface Board, Appendix A-9
View all Epson T-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
#8143 New Serial Interface Board If you are using an optional interface, it may be necessary for you to alter the communications protocol of the printer or the computer so they can communicate properly. In most cases, you should use the information in your optional interface manual or your computer's manual to match the computer with the interface. For the #8143 optional interface board, use the DIP switch settings shown below. These switches are on the interface board, not on the printer. #8143 DIP switch settings DIP sw 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 Function Selects baud rate Selects data length Selects baud rate Selects baud rate Selects EVEN ODD parity Enables /disables parity check Selects baud rate Enables/disables #8143 mode ON OFF See following table 7 bits 8 bits See following table See following table EVEN ODD Enabled Disabled See following table Enabled Disabled Appendix A-9