Epson WorkForce 840 Quick Guide - Page 35
Network Setup, Wireless Network Setup - installation
View all Epson WorkForce 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Network Setup Make sure you follow the instructions on the Start Here sheet to set up your product, choose your connection, and install the software. The on-screen instructions during the installation process help you set up your network connection. Follow the instructions in this chapter only if you need additional help: ■ For wireless network setup, see below. ■ For wired network (Ethernet®) setup, see page 43. Wireless Network Setup You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the cable. If you're using Mac OS X 10.6 or don't have a USB cable, you'll need to use the printer's control panel to select wireless settings instead. Note: If you have trouble setting up your product, see "Network Problems" on page 47. ■ If this is the first time that you're installing the product, see "Installing for the First Time" on page 36. ■ If your product is already on your wireless network and you need to set up additional computers to print to the product, see "Setting Up Additional Computers" on page 41. Network Setup 35