Fluke CNX v3000 Manual - Page 15
Display Hold, Yellow Button, Display Backlight, Manual and Auto Range
View all Fluke CNX v3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Display Hold Warning To prevent possible electrical shock, fire, or personal injury, do not use the HOLD function to measure unknown potentials. When HOLD is turned on, the display does not change when a different potential is measured. In the display hold mode, the Product holds the DMM measurement in the display. All wireless module measurements continue to update. To hold a measurement in the display, push . The display shows when display hold is turned on. Push again to stop hold mode and show measurements in the display. Yellow Button Push the YELLOW button ( ) to set the Product to a different measurement function. The different functions are shown in yellow around the rotary switch. Frequency, mV ac, capacitance, diode test, and mA dc are functions of the Product set with the yellow button. Display Backlight Push to turn on and turn off the backlight. The backlight automatically turns off after 2 minutes. Wireless Multimeter Display Hold Manual and Auto Range The Product can be set to manual or auto range. In autorange, the Product sets the range so the input is shown with the best resolution. Manual range lets you set the range. When you turn on the Product, it is set to autorange and Auto shows in the display. To set the Product to manual range, push . Note You cannot change range when the Product is in the MIN MAX AVG record mode or in display hold mode. If you push in one of these modes, the Product will beep twice to alert you to an invalid operation. 7 MyFlukeStore Shop for Fluke products online at: www. .com 1.877.766.5412