Fluke CNX v3000 Manual - Page 39
Fuse Test, Fuse Test
View all Fluke CNX v3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Fuse Test To do a fuse test: 1. Set the function switch to . 2. Connect a test lead to the jack as shown in Figure 10. 3. Touch the other end of the test lead to the mA jack. A good fuse will show a resistance of 12 Ω or less. Replace the fuse if the resistance is higher or OL is shown. Wireless Multimeter Fuse Test 440 mA
Wireless Multimeter
Fuse Test
31
Fuse Test
To do a fuse test:
1.
Set the function switch to
.
2.
Connect a test lead to the
jack as shown in
Figure 10.
3.
Touch the other end of the test lead to the mA jack.
A good fuse will show a resistance of 12
Ω
or less.
Replace the fuse if the resistance is higher or
OL
is
shown.
440 mA
<12
OK
OK
gxr009.eps
Figure 10. Fuse Test
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com