Foscam FI8910W USER MANUAL_1 - Page 59
I have forgotten the administrator username, 4.1.2 Subnet doesn’t match, dbclick to change - reset button
View all Foscam FI8910W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
www.foscam.us 4.1.1 I have forgotten the administrator username and/or password To reset the administrator username and password, press and hold down the RESET BUTTON for 10 seconds. Upon releasing the reset button, the username and password will return to the factory default administrator username and password. Please power on the camera before reset Default administrator username: admin Default administrator password: No password 4.1.2 Subnet doesn't match, dbclick to change If the IP Camera Tool shows the error "Subnet doesn't match, dbclick to change!", select Obtain IP from DHCP server. If this error still exists after obtaining an IP from the DHCP server, check the local area connection of your computer and verify the subnet and gateway of the camera which should be the same subnet of your computer. 4.1.3 No Pictures Problems Video streaming is managed by the ActiveX controller. If the ActiveX controller isn't installed correctly you will see no video image. There are two ways to resolve this problem: 1) Reinstall "IP Camera Tool" and ActiveX controller(recommended). 2) Download ActiveX controller and set the security setting of IE: IE browser Tool Internet Foscam Digital Technologies LLC Telephone: 1-800-930-0949 58