Foscam FI9826P USER MANUAL - Page 44
WPS Wi-Fi Protected Set-up
View all Foscam FI9826P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
www.foscam.us www.foscam.us 2 Enter the password of your router. 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. Figure 4.23 Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK (see Figure4.36). Congratulations! You have set up the wireless connection of the camera successfully. Note If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. WPS (Wi-Fi Protected Set-up) Step 01) Press and hold the WPS button for two seconds. Foscam Digital Technologies LLC FoscamTeDleigpihtaolnTee:c1h-n8o0l0o-g93ie0s-0L9L4C9 Telephone: 1-800-930-0949 43 43