Foscam FI9826P USER MANUAL - Page 65
Record-> Alarm Record
![]() |
View all Foscam FI9826P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
www.foscam.us www.foscam.us Figure 4.55 There are four alarm indicators: A Camera Sound and PC Sound If the camera has connected with a speaker or other audio output device, if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera will hear beep alarm sound. B Send E-mail If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot. C Take Snapshot If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel. If you select Send Email, at the same time the picture will be send to you as an attachment. Capture interval: The interval time between two pictures. D Record If you select this checkbox, when the motion has been detected, the camera will record automatically and store the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as the Alarm record files storage path, please go to Record-> Storage location page to verify this settings. The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record-> Alarm Record page and change the alarm time settings. Step 05: Set detection area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. Foscam Digital Technologies LLC FoscamTeDleigpihtaolnTee:c1h-n8o0l0o-g93ie0s-0L9L4C9 Telephone: 1-800-930-0949 64 64
![](/manual_guide/products/foscam-fi9826p-user-manual-acd8718/65.png)