Foscam FI9826P USER MANUAL - Page 75
IP Filtering
View all Foscam FI9826P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
www.foscam.us www.foscam.us Add: Select one preset points and add it to the selected cruise track. Delete: Select one preset points you have added to one cruise track, click delete. Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track. Attention: Considering the life time and thermal issue of the motor, it's not recommend to do long-time cruise. 4.7.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots. It supports three modes: Disable Start-Up, Go To Home Position and Go To Preset Position. Disable Start-up: When rebooting, the camera will not pan / tilt. Go to Home Position: When rebooting, the camera will pa Providing Central Management Software to manage or monitor multi-cameras n / tilt and stops at center. Go to Preset Position: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops at the preset position you have set. Figure 4.73 4.8 IP Filtering This section explains how to control the access permission by checking the client PC's IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses.. Foscam Digital Technologies LLC FoscamTeDleigpihtaolnTee:c1h-n8o0l0o-g93ie0s-0L9L4C9 Telephone: 1-800-930-0949 74 74