Foxconn Quantumian1 User Manual - Page 44
Voltage Configuration, ► Active to Active Delay tRRD
View all Foxconn Quantumian1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3 This item dispalys the CAS Latency time. The CAS Latency is the number of clock cycles that elapse from the time the request for data is sent to the actual memory location until the data is transmitted from the module. ► Row Precharge Time(tRP) This item dispalys the DRAM RAS precharge time (in clock cycles). ► RAS# to CAS# Delay(tRCD) This item dispalys the delay time (in clock cycles) between the CAS and RAS strobe signals. ► RAS# Active Time(tRAS) This item dispalys the precharge delay time (in clock cycles). ► Write Recovery Time(tWR) This item allows you to select the write recovery time (in clock cycles). ► Row Refresh Cycle Time(tRFC) This item allows you to select the minimum refresh recovery time (in clock cycles). ► Write to Read Delay (tWTR) This item allows you to set minimum Write-to-read delay (in clock cycles). ► Active to Active Delay (tRRD) This item allows you to set Active to Active Delay (in clock cycles). ► Read CAS# Precharege(tRTP) This item is used to set the read CAS to precharge time (in clock cycles). ►Four Active Window Delay(tFAW) This item is used to set the four active window delay time (in clock cycles). Voltage Configuration Aptio Setup Utility - C opyright (C) 2011 American Megatrends, Inc. Quantum BIOS Voltage Configuration Set the CPU FAN Mode function. CPU PLL Voltage CPU VSA Voltage Offset CPU Core Voltage Offset CPU VTT (Uncore) Voltage Patsburg PCH Core Voltage DRAM Voltage (VDIMM1 & VDIMM2) DRAM Voltage (VDIMM3 & VDIMM4) [1.80V] [Default] [Default] [Default] [Default] [Default] [Default] Option: (1) Full Speed (2) By Duty Cycle (3) Smart Fan (4) Stop FAN → ← : Select Screen ↑ ↓ : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. ► CPU PLL Voltage This item is used to set DRAM Voltage. The default voltage is 1.80V. ►CPU VSA Voltage Offset This item is used to set the CPU VSA voltage offset. ► CPU Core Voltage Offset This item is used to set the CPU Core voltage offset. ► CPU VTT (Uncore) Voltage 37