Frigidaire FER641FS Installation Instructions - Page 4
Location, Of Your Dryer - dimensions
UPC - 012505376450
View all Frigidaire FER641FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
LOCATION OF YOUR DRYER DO NOT INSTALL YOUR DRYER: 1 fn an area exposed to dripping water or outside weather conditions 2 In an area where it will come in contact with curtains, drapes, or anything that will obstruct the flow of combustion and ventilation air. 3 On carpet Floor MUST be solid with a maximum slope of 1 inch (254 cm) INSTALLATION tN RECESS OR CLOSET 1 A dryer installed in a bedroom, bathroom, recess or closet, MUST be exhausted outdoors_ 2 No other fuel burning appliance shall be installed in the same closet as the Gas dryer 3 Your dryer needs the space around it for proper ventilation, DO NOT INSTALL YOUR DRYER IN A CLOSET WITH A SOLID DOOR. 4. A minimum of 120 square inches (7742 square era) of opening, equally divided at the top and bottom of the door, is required Air openings are required to be unobstructed when a door is installed_ A Iouvered door with equivalent air openings for the full length of the door is acceptable MINIMUM INSTALLATION CLEARANCES (inches) Alcove or Under counter FRONT 0(0cm) SIDES 0(0cm) REAR 0(0cm) TOP 15(38_1cm) Closet 1(254cm) 0(0cm) 0(0cm) 15(38_1cm) Closet door ventilation required; 2 Iouvered openings each 60 square inches (387 square centimeters) -- 3 inches (76 cm) from bottom and top of door. THIS DRYER MUST BE EXHAUSTED OUTDOORS, 5, The following illustrations show minimum clearance dimensions for propel operation in a recess or closet installation it CLOSET DOOR II --_ii_ NOTE: Under counter and stack models- 0 inches (0 cm) for sides, rear, and top. 0" (0 era) UNDER COUNTER INSTALLATION If an under counter* installation is desired, the dryer MUST have a top sheet kit installed, P/N 131629100. Kit is available from an authorized parts distributor. *Custom-sized countertop is required. 4