Fujitsu MAJ3364MP Manual/User Guide - Page 26
Disk/head configuration, The motor speed is controlled by
View all Fujitsu MAJ3364MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
(1) Disks The disks have an outer diameter of 95 mm (3.74 inch) and inner diameter of 25 mm (0.98 inch) for MAH series, and 84 mm (3.3 inch) outer diameter and 25 mm (0.98 inch) inner diameter for MAJ series. The disks are good for at least 20,000 contact starts and stops. Each model contains following number of disks. MAH3182: 2 MAH3091: 1 MAJ3364: 5 MAJ3182: 3 MAJ3091: 2 (2) Heads The MR (Magnet - Resistive) of the CSS (contact start/stop) type heads are in contact with the disks when the disks are not rotating, and automatically float when the rotation is started. Figure 1.5 shows the configuration of disks and heads MAH3182 0 1 2 3 MAH3091 0 1 MAJ3364 0 1 2 3 4 5 6 7 8 9 MAJ3182 0 1 2 3 4 MAJ3091 0 1 2 Figure 1.5 Disk/head configuration (3) Spindle motor The disks are rotated by a direct-drive hall-less DC motor. The motor speed is controlled by a feedback circuit using the counter electromotive current to precisely maintain the speed at ±0.5% of the specified speed. (4) Actuator The actuator, which uses a rotary voice coil motor (VCM), consumes little power and generates little heat. The head assembly at the end of the actuator arm is controlled and positioned via feedback of servo information in the data. C141-E103-02EN 1 - 7