Fujitsu MAJ3364MP Manual/User Guide - Page 60
Mounting frame structure, Limitation of side-mounting
View all Fujitsu MAJ3364MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 4.6 Mounting frame structure (2) Limitation of side-mounting Mount the IDD using the 4 screw holes at the both ends on the both sides as shown in Figure 4.7. Do not use the center hole by itself. In case of using the center hole, it must be used in combination with 2 holes on both ends. (Total 6 screws for 6 holes enclosed) Holes for 4 mounting screw. 3 2 Do not use these holes Holes for mounting screw. 1 Use four holes (No.1-4) to mount. Figure 4.7 Limitation of side-mounting (3) Limitation of bottom-mounting Use all 4 mounting holes on the bottom face. C141-E103-02EN 4 - 7
C141-E103-02EN
4 - 7
Figure 4.6
Mounting frame structure
(2)
Limitation of side-mounting
Mount the IDD using the 4 screw holes at the both ends on the both sides as shown in Figure 4.7.
Do not use the center hole by itself.
In case of using the center hole, it must be used in combination with 2 holes on both ends.
(Total 6 screws for 6 holes enclosed)
Figure 4.7
Limitation of side-mounting
(3)
Limitation of bottom-mounting
Use all 4 mounting holes on the bottom face.
4
3
2
1
Use four holes (No.1-4) to mount.
Holes for
mounting screw.
Holes for mounting screw.
Do not use these holes