Fujitsu MAJ3364MP Manual/User Guide - Page 46
This is the 40-byte code that allows detection and correction of errors in the data field, which is
![]() |
View all Fujitsu MAJ3364MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
(4) Data field (DATA1-DATA4) User data is stored in the data field of the sector. The length of the data field is equal to that of the logical data block which is specified with a parameter in the MODE SELECT command. Any even number between 512 and 528 bytes can be specified as the length. (5) BCRC It is a 4-byte error detection code. Errors in the ID field. Single burst errors with lengths of up to 32 bits for each logical block can be detected. (6) ECC This is the 40-byte code that allows detection and correction of errors in the data field, which is capable of correcting the single burst error up to 160 bits max. on the fly. (7) PAD A specified length of x'00' pattern shown in Figure 3.6 is written in this field. This field includes the variation by rotation and circuit delay till reading/writing. C141-E103-02EN 3 - 9
![](/manual_guide/products/fujitsu-maj3182mc-manualuser-guide-3669525/46.png)