Garmin Alpha 200i Owners Manual - Page 5

Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Alpha System Before you can use the Alpha system, you must set up the devices. 1 Charge the handheld device (Charging the Handheld Device, page 2). 2 Charge the dog collar device (Charging the Dog Collar Device, page 2). 3 Turn on the devices (Turning On the Device, page 2). 4 Select a language (Selecting a Language, page 2). 5 If necessary, pair the dog collar device with the handheld device (Methods to Add a Dog Collar Device to a Handheld Device, page 3). 6 If necessary, calibrate the compass on the handheld device (Calibrating the Compass, page 12). Device Overviews Alpha Handheld Device NOTICE Avoid using a high-powered radio (greater than 5 W) in close proximity to the handheld device. It may cause irreversible damage to the handheld device. Alpha Device Keys Power key Customizable training keys Training up Training down Training enter SOS key (under protective cap) Dog Collar Device NOTE: Your dog collar device may look different than the device pictured. Satellite antenna VHF radio antenna Mounting spine microSD® memory card slot (under battery) Battery cover D-ring Micro-USB port (under weather cap) Getting Started VHF antenna GPS antenna Power key Status LED and flashing beacon LEDs Installing the Battery Pack 1 Turn the D-ring counter-clockwise, and pull up to remove the cover. 2 Locate the metal contacts on the end of the lithium-ion battery. 3 Insert the battery into the compartment, contacts first. 4 Press the battery into place. 1