Garmin GPSMAP 620 Owner's Manual - Page 20

Setting a Direct Course Go To, Following a Direct Course Go To on the, Navigation Chart - sd card

Page 20 highlights

Marine Mode: Navigating • Guide To-use the chart data on a BlueChart g2 Vision SD card to automatically suggest a passage from your current location to the destination (page 17). After you set the course, follow the course using the Navigation chart, the Mariner's Eye screen, or the Mariner's Eye 3D screen. Setting a Direct Course (Go To) When the pointer icon is on the location you want to navigate to, or you have selected a destination using Where To, touch Navigate To > Go To. Following a Direct Course (Go To) on the Navigation Chart, Mariner's Eye Screen, or Mariner's Eye 3D Screen After you set the course using Go To, a magenta line represents the direct course from the start point to the end point, and does not move, even when you veer off course. Caution: When using Go To, a direct course and a corrected course may pass over land or shallow water. Steer to avoid land, shallow water, and other dangerous objects. In the center of the magenta line is a thinner purple line that represents the corrected course from your current location to the end point. The corrected course line is dynamic, and it moves with your boat when you veer off course. 1. After you set a course, from the Home screen, touch Charts and then touch Navigation Chart, Mariner's Eye, or Mariner's Eye 3D. 2. Follow the magenta line (direct course). 3. Steer off course to avoid land, shallow water, and other obstacles on the water. 4. When you are off course, follow the purple line (corrected course) to travel to your destination, or steer back to the magenta line (direct course). Corrected course Direct course Start point Following a Direct Course on the Navigation Chart 14 GPSMAP 620 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

²´
GPSMAP 620 Owner’s Manual
Marine Mode: Navigating
Guide To
—use the chart data on a BlueChart g2 Vision SD card
to automatically suggest a passage from your current location to
the destination (
page 17
).
After you set the course, follow the course using the Navigation
chart, the Mariner’s Eye screen, or the Mariner’s Eye 3D screen.
Setting a Direct Course (Go To)
When the
pointer icon is on the location you want to navigate
to, or you have selected a destination using
Where To
, touch
Navigate To
>
Go To
.
Following a Direct Course (Go To) on the
Navigation Chart, Mariner’s Eye Screen, or
Mariner’s Eye 3D Screen
After you set the course using
Go To
, a magenta line represents
the direct course from the start point to the end point, and does not
move, even when you veer off course.
CAUTION:
When using
Go To
, a direct course and a corrected
course may pass over land or shallow water. Steer to avoid land,
shallow water, and other dangerous objects.
In the center of the magenta line is a thinner purple line that
represents the corrected course from your current location to the
end point. The corrected course line is dynamic, and it moves with
your boat when you veer off course.
1. After you set a course, from the Home screen, touch
Charts
and then touch
Navigation Chart
,
Mariner’s Eye
, or
Mariner’s
Eye 3D
.
2. Follow the magenta line (direct course).
3. Steer off course to avoid land, shallow water, and other
obstacles on the water.
4. When you are off course, follow the purple line (corrected
course) to travel to your destination, or steer back to the
magenta line (direct course).
Corrected
course
D±rect course
Start po±nt
Following a Direct Course on the
Navigation Chart