Garmin GPSMAP 620 Owner's Manual - Page 9

Powering the GPSMAP 620 On and Off, Removing and Inserting the Battery Pack, Power, Turn Off - wiring

Get Garmin GPSMAP 620 - Marine Chartplotter PDF manuals and user guides
UPC - 749856016963
View all Garmin GPSMAP 620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Powering the GPSMAP 620 On and Off Power on the GPSMAP 620: • If the mounting bracket on your boat or in your car is connected to power, the device powers on when you place it in the mount. • To power on the device manually, press and hold the Power key until the Garmin logo appears on the screen. Power off the GPSMAP 620: • When you remove the device from the mounting bracket, you will be prompted to continue on battery power. Touch Turn Off to power off the device. • To power off the device manually, press and hold the Power key until the unit powers off. Note: If you manually turn off the device while it is connected to a power source, it will continue to charge the battery Caution: If the marine mounting bracket is not wired through the ignition or a switch, the GPSMAP 620 will drain the boat battery, even when powered off. Remove the device from the mounting bracket to avoid draining the boat battery. Getting Started Removing and Inserting the Battery Pack Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. To remove the battery pack: 1. Remove the GPSMAP 620 from the mounting bracket. 2. On the back of the device, lift up the battery locking ring and turn it counter-clockwise. 3. Tilt the battery pack away from the device and lift it out. To Insert the battery pack: 1. On the back of the GPSMAP 620, fit the bottom of the battery pack into the device. 2. Tilt the battery pack towards the device until it is tight. 3. Turn the locking ring clockwise to lock the battery pack in place. Important battery notes: • Before using the GPSMAP 620 for the first time, charge the battery for at least six hours. • The lithium-ion battery pack used in the device is primarily a backup battery source. Use the device in a mount with external power whenever possible. GPSMAP 620 Owner's Manual 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
GPSMAP 620 Owner’s Manual
³
Getting Started
Powering the GPSMAP 620 On and Off
Power on the GPSMAP 620:
•
If the mounting bracket on your boat or in your car is connected
to power, the device powers on when you place it in the mount.
•
To power on the device manually, press and hold the
Power
key until the Garmin logo appears on the screen.
Power off the GPSMAP 620:
•
When you remove the device from the mounting bracket, you
will be prompted to continue on battery power. Touch
Turn Off
to power off the device.
•
To power off the device manually, press and hold the
Power
key until the unit powers off.
NOTE:
If you manually turn off the device while it is connected to
a power source, it will continue to charge the battery
CAUTION:
If the marine mounting bracket is not wired through
the ignition or a switch, the GPSMAP 620 will drain the boat
battery, even when powered off. Remove the device from the
mounting bracket to avoid draining the boat battery.
Removing and Inserting the Battery Pack
WARNING
: This product contains a lithium-ion battery. To prevent damage,
remove the unit from the vehicle when exiting or store it out of direct sunlight.
To remove the battery pack:
1. Remove the GPSMAP 620 from the mounting bracket.
2. On the back of the device, lift up the battery locking ring and
turn it counter-clockwise.
3. Tilt the battery pack away from the device and lift it out.
To Insert the battery pack:
1. On the back of the GPSMAP 620, fit the bottom of the battery
pack into the device.
2. Tilt the battery pack towards the device until it is tight.
3. Turn the locking ring clockwise to lock the battery pack in place.
Important battery notes:
•
Before using the GPSMAP 620 for the first time, charge the
battery for at least six hours.
•
The lithium-ion battery pack used in the device is primarily a
backup battery source. Use the device in a mount with external
power whenever possible.