Garmin GPSMAP 620 Owner's Manual - Page 48
Automotive Mode: Getting Started, Step 1: Mount Your GPSMAP 620, Step 2: Con Your GPSMAP 620,
UPC - 749856016963
View all Garmin GPSMAP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Automotive Mode: Getting Started Automotive Mode: Getting Started Step 1: Mount Your GPSMAP 620 1. Place the GPSMAP 620 automotive dash mount on the dashboard of your vehicle. 2. Snap the GPSMAP 620 mounting bracket onto the automotive dash mount arm, and place the GPSMAP 620 in the mounting bracket (see page 2). 3. Plug the speaker/vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically, in automotive mode, if it is plugged in and the vehicle is running. Step 2: Configure Your GPSMAP 620 If your GPSMAP 620 device does not power on automatically, press the Power key to turn it on. Follow the on-screen instructions. Press and hold the Power key to turn off your device. Step 3: Acquire Satellites Go outdoors to an open area, away from tall buildings and trees and turn on your GPSMAP 620. Acquiring satellite signals can take a few minutes. The bars indicate satellite strength. When at least one of the bars is green, 42 your GPSMAP 620 has acquired satellite signals. Now you can select a destination and navigate to it. Step 4: Use Your GPSMAP 620 ➊ ➋ ➌➍ ➎ ➏ ➐➑ Automotive Mode: Menu Page ➊ GPS satellite strength. ➋ Usage mode. Touch this icon to change modes. ➌ Battery status. ➍ Current time. Touch to change time settings. ➎ Touch to find a destination. ➏ Touch to view the map. ➐ Touch to adjust the volume. ➑ Touch to use the tools such as Settings and Custom Routes. GPSMAP 620 Owner's Manual