Garmin GPSMAP 620 Owner's Manual - Page 23
Setting an Automatic Course Guide
![]() |
UPC - 749856016963
View all Garmin GPSMAP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Follow the magenta and purple line (route leg) from the start point to the first turning point. 3. After you reach the first turning point, follow the magenta and purple line (route leg) to each subsequent turning point, until you reach the end point. 4. Steer off course to avoid land, shallow water, and other obstacles on the water. 5. When you are off course, follow the orange arrow (Course to Steer) to steer back to the magenta and purple line (route leg). Route turn Route leg Course to Steer Start point Following a Route on the Navigation Chart Marine Mode: Navigating Route turn Route leg Course to Steer Following a Route on the Mariner's Eye 3D Screen Note: When following a route, important navigation information appears in a data bar along the top of the chart. To adjust the settings of the data bar, see page 37. Setting an Automatic Course (Guide To) When using a preprogrammed BlueChart g2 Vision SD card, you can use Automatic Guidance to automatically create a suggested passage based on available BlueChart g2 Vision chart information. See page 35 for instructions on setting up Automatic Guidance for your boat. GPSMAP 620 Owner's Manual 17
![](/manual_guide/products/garmin-0100069600-owners-manual-f28e039/23.png)