Garmin Nuvi 500 Owner's Manual - Page 47

Changing the Fuse Caution: When replacing the fuse, do not lose any of the small pieces, and ensure they are put back in the proper place. If your unit will not charge in your vehicle, you might need to replace the fuse located at the tip of the vehicle adapter. 1. Unscrew the black, round end piece, and remove it. 2. Remove the fuse (glass and silver cylinder), and replace it with a 3 A fast‑blow fuse. End piece Silver tip Fuse Appendix Mounting on Your Dashboard Use the enclosed mounting disk to mount your unit to the dashboard and comply with certain state regulations. Caution: The permanent mounting adhesive is extremely difficult to remove after it is installed. 1. Clean and dry the dashboard where you are placing the disk. 2. Remove the backing from the adhesive on the bottom of the disk. 3. Place the disk on the dashboard. 4. Remove the clear plastic cover from the top of the disk. 5. Place the suction cup mount on top of the disk. Flip the lever down (toward the disk). 3. Ensure that the silver tip is placed in the black end piece. Screw on the black end piece. nϋvi 500 Series Owner's Manual 41