Gateway FX530S 8512279 - Gateway Computer Reference Guide (for Gateway FX-Seri - Page 42
Connecting multiple displays to your CrossFire, video cards
View all Gateway FX530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CHAPTER 4: Advanced Hardware Setup To enable CrossFire: 1 Click Start, All Programs, Catalyst Control Center, then click Catalyst Control Center. The Control Center opens. 2 Click the CrossFire setting, click Enable CrossFire, then click OK. Connecting multiple displays to your CrossFire video cards When CrossFire is disabled and the interconnect cable is not attached (when both cards are acting as standard video cards), you can attach up to four displays to the video cards. To use multiple displays on the CrossFire video cards: 1 Turn off your computer, then connect the displays to the appropriate ports on your video cards. 2 Turn on your computer. 3 Click Start, All Programs, Catalyst Control Center, then click Catalyst Control Center. The Control Center opens. 4 Click View to switch to Advanced View. 5 Click Disable CrossFire to disable Crossfire and enable multiple monitor support, then click Apply. All display devices are enabled. 6 On the tree menu to the left, click Displays Manager. 36