Gateway FX530S 8512279 - Gateway Computer Reference Guide (for Gateway FX-Seri - Page 60
firmly into the bank. The tabs on the sides of
View all Gateway FX530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CHAPTER 5: Upgrading Your Computer 3 Find the memory module banks on your system board. Channel B slot 1 Channel B slot 0 Channel A slot 1 Channel A slot 0 4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank. 5 Align the notches on the new DIMM with the notches on the memory module bank, then press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click. 6 Return your computer to its upright position. 7 Replace the side panel by following the instructions in "Replacing the side panel" on page 52. 54