Gateway FX530S 8512279 - Gateway Computer Reference Guide (for Gateway FX-Seri - Page 75
sure that Pin 1 on the processor indicated by
View all Gateway FX530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
www.gateway.com 4 Loosen the four screws that secure the heat sink to the system board, then remove the heat sink. (The screws cannot be completely removed.) Caution The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you remove the old heat sink or unpack the new heat sink so you do not damage the TIM. If you need to apply new thermal material, first remove the old material using high-purity isopropyl (rubbing) alcohol and a lint-free cloth, then apply the new thermal material to the bottom of the heat sink. Screws 5 Release the processor by pushing down on the lever, then lifting the lever completely up. 6 Remove the processor from the system board. 7 Install the new processor onto the system board making sure that Pin 1 on the processor (indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on the processor socket (indicated by the absence of a pin hole in the processor socket), then return the lever to its locked position. 69