Gateway FX530S 8512279 - Gateway Computer Reference Guide (for Gateway FX-Seri - Page 50

Overclocking the processor

Page 50 highlights

CHAPTER 4: Advanced Hardware Setup 4 Press ↑ or ↓ to highlight the RAID volume you want to delete, then press DELETE. A warning message appears. 5 Type Y to confirm volume deletion. Resetting drives to non-RAID status To troubleshoot or repair incompatible RAID configurations, failed RAID volumes, or failed drives within a RAID volume, you can reset (remove from the RAID) the drives until the problems can be resolved. To reset drives to non-RAID status: 1 Start (or restart) your computer. During startup, the RAID option screen appears. 2 While the RAID option screen is open, press CTRL+i. The Matrix Storage Manager opens. 3 Highlight 3. Reset Disks to Non-RAID, then press ENTER. The Reset RAID Data menu opens. 4 Press ↑ or ↓ to highlight each of the drives you want to reset, press the spacebar to select (mark with a green triangle) each drive you want to reset, then press ENTER. A warning message appears. 5 Type Y to confirm the drive reset. Getting help For more information on RAID concepts, configuration, and maintenance, search for RAID FAQ information on the Gateway Technical Support Web site (www.gateway.com) and the Intel Support & Downloads Web site (support.intel.com). Overclocking the processor If your computer comes with an Extreme Edition CPU, the CPU is "unlocked," which means its clock speed (operating speed) can be increased (overclocked) beyond the default processor speed. Overclocking may result in system instability. To change the clock speed of your processor: 1 Turn off your computer and disconnect the power cord. 2 Place your computer on its side with the side accesss panel facing up. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160

CHAPTER 4: Advanced Hardware Setup
44
4
Press
or
to highlight the RAID volume you want to
delete, then press
D
ELETE
. A warning message appears.
5
Type
Y
to confirm volume deletion.
Resetting drives to non-RAID status
To troubleshoot or repair incompatible RAID configurations,
failed RAID volumes, or failed drives within a RAID volume,
you can
reset
(remove from the RAID) the drives until the
problems can be resolved.
To reset drives to non-RAID status:
1
Start (or restart) your computer. During startup, the
RAID option screen appears.
2
While the RAID option screen is open, press
C
TRL
+i
. The
Matrix Storage Manager opens.
3
Highlight
3. Reset Disks to Non-RAID
, then press
E
NTER
. The
Reset RAID Data
menu opens.
4
Press
or
to highlight each of the drives you want
to reset, press the spacebar to select (mark with a green
triangle) each drive you want to reset, then press
E
NTER
.
A warning message appears.
5
Type
Y
to confirm the drive reset.
Getting help
For more information on RAID concepts, configuration, and
maintenance, search for RAID FAQ information on the
Gateway Technical Support
Web site (
www.gateway.com
) and
the
Intel Support & Downloads
Web site (
support.intel.com
).
Overclocking the processor
If your computer comes with an Extreme Edition CPU, the CPU
is “unlocked,” which means its clock speed (operating speed)
can be increased (overclocked) beyond the default processor
speed. Overclocking may result in system instability.
To change the clock speed of your processor:
1
Turn off your computer and disconnect the power cord.
2
Place your computer on its side with the side accesss
panel facing up.