GE P2S975SEPSS Installation Instructions - Page 11
Installation Instructions, INSTALL THE RANGE
UPC - 084691199236
View all GE P2S975SEPSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Instructions INSTALL THE RANGE 20 SLIDE RANGE INTO OPENING A Position the range in front of the cabinet opening. B Make sure the supports which overhang the countertop clear the countertop. If necessary, raise the unit by lowering the leveling legs. C Push while lifting the range into the opening, until the range is within 2″ of engaging the anti-tip bracket. D Remove the protective trim from the side (if provided). E Using the adjustable pliers or wrench, carefully screw in the back leveling leg until the overhang comes to rest on the countertop. 20 SLIDE RANGE INTO OPENING (cont.) H Plug the range cord into the receptacle. Locate the cord in the back of the range in a manner that it will not touch or be moved by the drawer. Position range cord so that there is no interference with storage drawer STORAGE DRAWER Adjustable wrench or pliers F Carefully screw in the front two leveling legs (similar to Step E) until the overhang touches the countertop. G Carefully push the range into the opening until the countertop fully engages the control panel. The back maintop overhang should cover the cutout opening. 21 FINAL CHECK OF ANTI-TIP BRACKET Check to make sure that the rear leveling leg is fully inserted into the Anti-Tip bracket and that the bracket is securely installed. Countertop Make sure the edge of the countertop fits flush against the end of the front control panel 11