GE P2S975SEPSS Installation Instructions - Page 13

Installation Instructions 24 COOKTOP BURNERS A ASSEMBLE THE BURNERS CAUTION: The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while the top of the burner is removed. Do not remove the top or touch the electrode of any burner while another burner is turned on. Electrical shock might result. a. Place the burner head onto the burner base, making sure that the head is properly oriented over the burner base and the electrode. Make sure to place the correct burner head on the correct burner base and that the burner head sits level on the burner base. The burner heads are not interchangeable. Medium head Small head Large head Front of range Extra large head b. Place the burner caps on the burner heads, making sure to place the correct burner cap on the correct burner head. The burner caps are not interchangeable. Make sure that the burner caps are properly seated on the burner heads. Burner cap properly seated Burner cap not properly seated c. Front right burner Make sure the hole in the burner head assembly is positioned over the electrode and that the burner head is fully inserted inside the burner base. A small gap between the base and head is normal. Burner head Burner cap Electrode Burner base Front left burner, back right burner and back left burner Burner cap Burner head Make sure the slot in the Stability chamber burner head is Electrode positioned over the electrode. The burner cap Burner base has three to four pins. When placing the cap, make sure none of the pins sits in the stability chamber. d. Place the burner grates over the burners. 13