GE P2S975SEPSS Installation Instructions - Page 4

Installation Instructions PRE-INSTALLATION CHECKLIST (CONT.) 4 CAREFULLY, TILT RANGE TO ACCESS RANGE LEVELING LEGS Use an adjustable wrench to screw leveling legs out so that support flanges clear top of countertop. 5 REMOVE THE DOOR IF NECESSARY Door removal is not a requirement for installation of the product, but is an added convenience. To remove the door: A UNLOCK HINGES Push both hinge locks down toward the door frame, to the unlocked position. This may require a flat blade screwdriver. Hinge slot Hinge unlocked position Hinge arm B POSITION DOOR Place hands on both sides of the door, and close the oven door to the removal position. This is half way between the broil stop and fully closed. 5 REMOVE THE DOOR IF NECESSARY (cont.) C LIFT OFF DOOR Lift door up and out until the hinge arms clear the slots. DO NOT LIFT THE DOOR BY THE HANDLE. NOTE: The oven door is very heavy. Be sure you have a firm grip before lifting the oven door off the hinges. Use caution once the door is removed. Do not lay the door on its handle. This could cause dents or scratches. Hinge clears slot 6 REMOVE PACKING MATERIALS Also remove labels on door, plastic on trim and panel and all tape around the range. 7 REMOVE STORAGE DRAWER A Pull the drawer out until it stops. B Lift the front of the drawer until the stops clear the guides. Rail Guide Stop Stop C Pull forward and remove the drawer. 4