GE PDW7900P Installation Instructions - Page 9

Installation Instructions STEP 15-POSITION DISHWASHER, SECURE TO COUNTERTOP OR CABINET In this step gou will need the 2 Phillips special head screws from the screw kit set aside in Step 1. The dishwasher must be secured to the countertop or the cabinet sides. When the underside of the countertop is wood, use Hethod 1. Use Hethod 2 when the underside of the countertop is made of a material, such as granite, that will not accept wood screws. Tip: Prevent door panel and control panel damage, Dishwasher must be positioned so the front panel and control panel do not contact the adjacent cabinets or countertop. Mounting screws must be driven straight and flush. Protruding screw heads could scratch the door panel or control panel and interfere with door operation. Method 1 Secure dishwasher to underside of wood countertop. , Recheck alignment of the dishwasher in the cabinet. Refer to Steps 13 and 14. Door panel and/or control panel must not hit cabinets or countertop. • Fasten the dishwasher to the underside of the countertop with the 2 Phillipsspecial head screws. Refer to Figure T.Hake certain screws are driven strobht and flush to prevent panel damage. Method 2 Secure dishwasher to cabinet sides •Recheck alignment of the dishwasher in the cabinet. Referto Steps 1.3and 14. Door panel and/or control panel must not hit cabinets or countertop. • Fasten the dishwasher to the adjacent cabinets with the 2 Philtipsspecial heed screws provided. Refer to Figures U and V. Hake certain screws ore driven straight and flush to prevent panel damage. SideHaunting Brackets Tub Frame " ....... FigUre U Countertop Haunting Brackets Bracket Attachment Screws (2 Each Side) Brackets Wood Countertop Granite Countertop /, Figure T Figure V STEP 16-CONNECT WATER SUPPLY Connect water suppig line to 90 ° elbow. ° Slide compression nut, then ferrule over end of water line. • insert water line into 90 ° elbow. ° Slide ferrule against elbow and secure with compression nut. IM PO RTANT- Check to be sure that door spring does not rub or contact the fill hose or water supply line, Test bg opening and closing the door. Reroute the lines if o rubbing noise or interference occurs, Door Spring Figure W Line 90 ° Elbow