Genie ScrewDrive Owner's Manual - Page 4

TABLE OF CONTENTS SECTION PAGE PRE-INSTALLATION CHECK LIST 2-3 4 TOOLS REQUIRED 4 SAFETY FEATURES 4 OPERATIONAL FEATURES 5 PARTS LISTS AND ILLUSTRATIONS 5-8 POWER HEAD 5 ONE-PIECE RAIL 6 THREE-PIECE RAIL 7 FASTENERS AND ACCESSORIES 8 SAFETY INFORMATION 9 PRE-INSTALLATION WARNING 9 1 MAIN ASSEMBLY 10-14 2 INSTALLATION 15-21 3 SAFE-T-BEAM 22-23 4 WALL CONTROL 24-25 5 LIGHT & LIGHT LENS 25 6 CONNECTING POWER 26 7 SETTINGS 27-28 CONTACT REVERSE 28 8 BATTERY & VISOR CLIP 28 9 PROGRAMMING REMOTE CONTROLS 29 TRANSMITTER COMPLIANCE STATEMENT 30 IMPORTANT SAFETY INSTRUCTIONS 30 10 MAINTENANCE & TROUBLESHOOTING 31-32 11 WIRING DIAGRAM A WARRANTY B ACCESSORIES ORDER FORM C RECOMMENDED TOOLS Carpenter's level Step ladder Adjustable wrench Pencil Drill 5/ 32" Drill Bit Ratchet Wire strippers Phillips screwdriver 7/16" and 9/16" Sockets Tape measure SAFETY FEATURES (varies by model) Safe-T-Beam® (STB) Non-Contact Reversing System Places an invisible beam across door opening that reverses the door during down travel to the fully open position if anything passes through beam. Safe-T-Reverse® Contact Reversing System Automatically stops and reverses a closing door within 2 seconds of contact with an object. Safe-T-Stop® Timed Reversed System Automatically opens a closing door, if door does not close within 30 seconds. Force Guard® Control Used to set the force required for opening and closing door. For maximum safety, set the minimum force required to fully open and close door. Automatic Lighting System Two light bulbs up to 60 Watts max. each are used for safer entries and exits. The light turns on when door is activated and automatically turns off 4.5 minutes later. Manual Emergency Release Allows the garage door to be opened or closed manually for emergencies or maintenance.