Gigabyte GA-VM800PMC Manual - Page 32
Init Display First, VGA Share Memory Size, Hard Disk Boot Priority
View all Gigabyte GA-VM800PMC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English 2-2 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Advanced BIOS Features Init Display First VGA Share Memory Size ` Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Password Check CPU Hyper-Threading (Note) Limit CPUID Max. to 3 (Note) No-Execute Memory Protect (Note) CPU Enhanced Halt (C1E) (Note) CPU Thermal Monitor 2(TM2) (Note) CPU EIST Function (Note) Virtualization Technology (Note) [PCI Slot] [64M] [Press Enter] [Floppy] [Hard Disk] [CDROM] [Setup] [Enabled] [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save ESC: Exit F6: Fail-Safe Defaults F7: Optimized Defaults F1: General Help Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard. PCI Slot Set Init display first to PCI Slot. (Default value) Onboard/AGP Set Init display first to Onboard/AGP. VGA Share Memory Size Disabled Disable this function. 16M Set VGA share memory size to 16 MB. 32M Set VGA share memory size to 32 MB. 64M Set VGA share memory size to 64 MB. (Default value) Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press to move it up, or to move it down the list. Press to exit this menu. (Note) This item will show up when you install a processor that supports this function. GA-VM800PMC Motherboard - 32 -