HTC Touch GSM HTC Touch ROM Upgrade (For Brightpoint only) - Page 136
Title bar, Wi-Fi Status screen, Start > Settings > Connections, > Wireless LAN, > Main
View all HTC Touch GSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
136 Getting Connected Next time you want to connect to the wireless network that you selected, just turn on Wi-Fi in Comm Manager and you will automatically be connected. You will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed wireless network (unless you perform a hard reset which will erase custom settings on your device). Note Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network. It may be necessary to provide a username and password for certain closed wireless networks. To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon ( ) will appear on the title bar. After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon ( ) appears on the title bar. The arrows in this icon will move back and forth while your device is scanning for a wireless network signal. Once your device successfully connects to a wireless network, the arrows stop moving. • Wi-Fi Status screen. Tap Start > Settings > Connections tab > Wireless LAN > Main tab to see the name of the wireless network that your device is currently connected to. The configuration and signal quality of the wireless network are also shown.