Haier UVH13013MTS Use and Care Manual - Page 15

INSTALLATION INSTRUCTIONS, Installation Instructions, PLACEMENT OF THE MOUNTING PLATE Cont.

Get Haier UVH13013MTS PDF manuals and user guides View all Haier UVH13013MTS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

INSTALLATION INSTRUCTIONS Installation Instructions 1. PLACEMENT OF THE MOUNTING PLATE (Cont.) C DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINET Plate Position - flat bottom cabinet Plate Position - recessed cabinet bottom Mounting Plate Tabs Touching the Cabinet Bottom Mounting Plate Tabs Touching the Back Frame of the Cabinet ƎWR&RRNWRS At least 30" Plate Position - cabinet with front overhang Mounting Plate with Tabs Below Cabinet Bottom the Same Distance as the Front Overhang Depth ƎWR&RRNWRS Your cabinets may have decorative trim that interferes with the unit installation. You may need to remove the decorative trim to install the unit properly and to make it level. THE KITCHEN HUB™ MUST BE LEVEL. Use a level to make sure the cabinet bottom is level. If the cabinets have a front overhang, install the mounting plate down the same distance as the front overhang depth. This will keep the unit level. 1. Measure the inside depth of the front overhang. 2. Draw a horizontal line on the back wall an equal distance below the cabinet bottom as the inside depth of the front overhang. 3. For this type of installation with front overhang, align the mounting tabs with this horizontal line, not touching the cabinet bottom as described in Step D. 49-2000492 Rev. 2 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
49-2000492
Rev. 2
15
INSTALLATION INSTRUCTIONS
C
DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINET
Installation Instructions
Your cabinets may have decorative trim that
interferes with the unit installation. You may need
to remove the decorative trim to install the unit
properly and to make it level.
THE KITCHEN HUB™ MUST BE LEVEL.
Use a level to make sure the cabinet bottom is
level.
If the cabinets have a front overhang, install the
mounting plate down the same distance as the front
overhang depth. This will keep the unit
level.
1.
Measure the inside depth of the front overhang.
2.
Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3.
For this type of installation with front overhang,
align the mounting tabs with this horizontal line,
not touching the cabinet bottom as described in
Step D.
Plate Position – flat bottom cabinet
Plate Position – cabinet with front overhang
Mounting Plate
Tabs Touching
the Cabinet
Bottom
Mounting Plate
with Tabs Below
Cabinet Bottom the
Same Distance as
the Front Overhang
Depth
At least 30"
Plate Position – recessed cabinet bottom
Mounting Plate
Tabs Touching the
Back Frame of the
Cabinet
1. PLACEMENT OF THE MOUNTING PLATE (Cont.)