Haier UVH13013MTS Use and Care Manual - Page 27

Horizontal Duct Cont.

Get Haier UVH13013MTS PDF manuals and user guides View all Haier UVH13013MTS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

INSTALLATION INSTRUCTIONS Installation Instructions C. OUTSIDE BACK EXHAUST (Horizontal Duct) (Cont.) C6 MOUNT THE KITCHEN HUB™ CAUTION To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the unit) or property damage, you will need two people to install this product. IMPORTANT: Do not put any pressure on front screen during installation. WARNING Risk of Electric Shock. Can cause injury or death: If installing unit with metal cabinets, cover the edge of the power supply cord hole with the nylon grommet in hardware bag. IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws. NOTE: When mounting the unit, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1-3. Do not pinch cord or lift unit by pulling cord. 1. Lift unit, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. C6 MOUNT THE KITCHEN HUB™ (Cont.) 2. Rotate front of unit up against cabinet bottom. 3. Insert 2 self-aligning screws (1/4"-28 x 3-1/4") through top-center cabinet hole. Turn two full turns on each screw. Cabinet Front Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess Self-Aligning Screw This distance can NOT exceed 2" to ensure proper installation Unit Top 4. Tighten the 2 screws to the top of the unit. (While tightening screws, hold the unit in place against the wall and the top cabinet.) C7 FINALIZE INSTALLATION Plug in the unit. 49-2000492 Rev. 2 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
49-2000492
Rev. 2
27
INSTALLATION INSTRUCTIONS
Installation Instructions
C6
MOUNT THE KITCHEN HUB™
CAUTION
To avoid the
risk of personal injury (back
injury or other injuries due to
excessive weight of the unit)
or property damage, you will
need two people to install
this product.
IMPORTANT:
Do not put any pressure on front
screen during installation.
WARNING
Risk of Electric Shock. Can
cause injury or death: If installing unit with metal
cabinets, cover the edge of the power supply
cord hole with the nylon grommet in hardware
bag.
IMPORTANT:
If filler blocks are not used, case
damage may occur from overtightening screws.
NOTE:
When mounting the unit, thread power cord
through hole in bottom of top cabinet. Keep it tight
throughout Steps 1–3. Do not pinch cord or lift unit
by pulling cord.
1.
Lift unit, tilt it forward, and hook slots at back bottom
edge onto four lower tabs of mounting plate.
C6
MOUNT THE KITCHEN HUB™
(Cont.)
2.
Rotate front of unit up against cabinet bottom.
3.
Insert 2 self-aligning screws (1/4”-28 x 3-1/4”)
through top-center cabinet hole. Turn two full
turns on each screw.
4.
Tighten the 2 screws to the top of the unit. (While
tightening screws, hold the unit in place against
the wall and the top cabinet.)
C7
FINALIZE INSTALLATION
Plug in the unit.
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Unit Top
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
This
distance
can NOT
exceed 2”
to ensure
proper
installation
C. OUTSIDE BACK EXHAUST
(Horizontal Duct) (Cont.)