Haier UVH13013MTS Use and Care Manual - Page 20
Vertical Duct Cont.
View all Haier UVH13013MTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
INSTALLATION INSTRUCTIONS Installation Instructions A. OUTSIDE TOP EXHAUST (Vertical Duct) (Cont.) A5 MOUNT THE KITCHEN HUB™ CAUTION To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the unit) or property damage, you will need two people to install this product. IMPORTANT: Do not put any pressure on front screen during installation. WARNING Risk of Electric Shock. Can cause injury or death: If installing unit with metal cabinets, cover the edge of the power supply cord hole with the nylon grommet in hardware bag. IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws. NOTE: When mounting the unit, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1-3. Do not pinch cord or lift unit by pulling cord. 1. Lift unit, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. A5 MOUNT THE KITCHEN HUB™ (Cont.) 3. Insert 2 self-aligning screws(1/4" - 28 x 3-1/4") through top-center cabinet hole. Turn two full turns on each screw. Cabinet Front Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess Self-Aligning Screw This distance can NOT exceed 2" to ensure proper installation Unit Top 4. Tighten the 2 screws to the top of the unit. (While tightening screws, hold the unit in place against the wall and the top cabinet.) 2. Rotate front of unit up against cabinet bottom. 20 49-2000492 Rev. 2