Haier UVH13013MTS Use and Care Manual - Page 23
INSTALLATION INSTRUCTIONS, Installation Instructions, B. RECIRCULATING
View all Haier UVH13013MTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
INSTALLATION INSTRUCTIONS Installation Instructions B. RECIRCULATING (Non-Vented Ductless) B3 ADJUST BLOWER EXHAUST The unit is shipped in the top venting mode exhaust configuration. The vertical deflector plate should be repositioned to the angled position. 1. Remove damper mounting plate and diverter. B4 MOUNT THE KITCHEN HUB™ 2. Install diverter in angled position and reinstall damper mounting plate. CAUTION To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the unit) or property damage, you will need two people to install this product. IMPORTANT: Do not put any pressure on front screen during installation. WARNING Risk of Electric Shock. Can cause injury or death: If installing unit with metal cabinets, cover the edge of the power supply cord hole with the nylon grommet in hardware bag. NOTE: When mounting the appliance, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1-3. Do not pinch cord or lift unit by pulling cord. 1. Lift appliance, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. 2. Rotate front of appliance up against cabinet bottom. 49-2000492 Rev. 2 23