Harman Kardon TC1000 Owners Manual - Page 29
Touchscreen - restore
![]() |
View all Harman Kardon TC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Harman Kardon Solution Ensure that the serial cable is connected properly to both the computer-connector port and the serial port. See "Connecting the TC1000 to Your Computer," page 15. Touchscreen My backlight, contrast, and time settings are lost. Cause Replacing the batteries or pressing the reset button restores all settings to their default configuration. Solution Adjust the backlight, contrast, and time settings to your preference. See "Adjusting the Display Time-Out," page 13, "Adjusting the Touchscreen Contrast," page 11, and "Setting the Time," page 12, as needed. I cannot see the display. Cause The display timed out, turning off the display. Solution Adjust the display setting to your preference. See "Adjusting the Display Time-Out," page 13. Cause Dead batteries. Solution Replace the batteries. See "Replacing the Batteries," page 28. Cause The contrast is set too low. Solution Adjust the contrast setting. See "Adjusting the Touchscreen Contrast," page 11. The touchscreen remains blank Causes l The batteries are low or dead. l The batteries were installed incorrectly. l The batteries are old. Solution Replace all batteries. See "Replacing the Batteries," page 28. Cause The display timed out. Solution Increase the period assigned to the Display Time-out feature. See "Adjusting the Display Time-Out," page 13. Cause The contrast settings may be set too low. Solution Adjust the contrast setting to your preference. See "Adjusting the Touchscreen Contrast," page 11. I received a Low Batteries icon in the title bar on my touchscreen. Cause The batteries are low. Solution Have fresh batteries ready to replace all batteries when you receive the Low Batteries warning. See "Replacing the Batteries," page 28. The Low Batteries warning appears in the center of the touchscreen and then the display disappears. Cause The batteries are too low to provide proper operation. Solution Replace all batteries. See "Replacing the Batteries," page 28. My batteries don't last very long. Cause Using the Backlight button wears down the batteries when used extensively. Solution l Use the Backlight button less. -or- Reduce the period assigned to the Display Time-out feature. See "Adjusting the Display Time-Out," page 13. 25
![](/manual_guide/products/harman-kardon-tc1000-owners-manual-a1c44d9/29.png)