Harman Kardon TC1000 Owners Manual - Page 8

Take Control Take Control Overview-Cont. Computer-Connector Port-The computer-connector port is used to establish a serial connection between the TC1000 and a compatible computer. This connection enables your TC1000 to transfer data to your computer, and vice versa. You can use the computer-connector port by simply following the instructions in "Setting Up Take Control with a Computer," page 14. IR Transmitter-The infrared (IR) transmitter sends an IR signal to your devices, directing them to perform an action, such as changing channels or volume level. When using your TC1000, you need to point the IR Transmitter toward the applicable device, and be within 23 feet (7.0 m) for it to receive the IR signal. Battery Compartment-The battery compartment houses four AA alkaline batteries. For more information on installing and replacing the batteries, see the instructions in "Installing the Batteries," page 6. Reset Button-You can use the reset button, located inside the battery compartment, to return the contrast, speaker, and time to their predefined default settings. Pressing the reset button will not change or delete learned IR codes, activities, macros, or any customizing of buttons performed through the Take Control Editor on your computer. To use the reset button: 1 Remove the cover to the battery compartment. 2 Using a paper clip, press the reset button. IR transmitter Computer-connector port Reset button Speaker Battery compartment Battery-compartment cover 4