Hayward TriStar VS TriStar VS Manual - Page 25

Screen 7. Power Usage 225W (1700W Max) 8. Drive Temperature 67ºC (110ºC Max) Buttons Used Comments Real-time display of pump power usage. Real-time display of motor driver temperature. 9. Event log Press + to view +- Use + to view event log Note: For troubleshooting purposes, the Event Log will record the last twenty error and/or trip conditions, as well as the amount of time that has elapsed since the condition occurred. 6.10. Stop/Resume Screen 1. Pump is stopped; press STOP/RESUME 2. again to resume normal operation. Note: When Stop/Resume is pressed at any time during normal operation, the above message will be displayed. The pump will stop within several seconds, and will remain stopped until Stop/Resume is pressed a second time, at which point the pump will resume normal operation. 6.11. Quick Clean Screen 1. Quick Clean Quick Clean running 2. Quick Clean 3450 rpm for 60 min; 3. Quick Clean press resume to end. Note: The above message will be displayed while Quick Clean is running. Quick Clean mode runs at the MAX allowed speed and expires after 60 min, and it may be cancelled early by pressing the Stop/Resume button, at which time the pump would return to normal operation. Page 25 of 36 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS TriStar VS Pump IS3200VSP Rev-C