HP 10842 10000 Series Rack Reference Guide - Page 20
Server Console Switch, Baying Option Kits, Side Panels, Stabilizing Feet
View all HP 10842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Configuration Factors • Server Console Switch-If a switch box is configured, use the CPU-to-Switch cable included with the server. The standard distance between the switch box and the keyboard, monitor, and/or mouse can vary by 3-, 7-, 12-, 20- and 40-foot lengths. Optional Plenum-rated KVM cables are available in 20-foot and 40-foot lengths. NOTE: National Electrical Regulations governing the installation of building wiring require that an appropriate cable, meeting fire-safety standards, must be used any time cabling is routed: • Through an overhead drop-ceiling • Under a computer room's raised flooring • From room to room • From floor to floor Be sure that the cable jacket or sleeving is made of material that does not burn easily and does not exude toxic fumes when exposed to heat. Be sure that the cable you have selected is appropriate for your installation site. If you require a U.S. plenum-rated (CL2P) cable, please contact your local HP authorized reseller to obtain the following options: • 149363-B21-20-foot plenum cable • 149364-B21-40-foot plenum cable • Baying Option Kits-The number of baying kits needed to join a series of racks is one less than the number of racks in the suite. Each baying kit supplies parts to bay two cabinets on 600 millimeters (24 inches) center line spacing. • Side Panels-Only one set of side panels is required for each row of bayed racks. • Stabilizing Feet-A stand-alone rack requires stabilizing feet. 2-4 HP 10000 Series Rack Reference Guide