HP 10842 10000 Series Rack Reference Guide - Page 44
Preparing the Sliding Rail, component rail from the sliding rail assembly.
View all HP 10842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing Components Preparing the Sliding Rail Components mounted with this type of rail are designed for frequent accessibility and/or maintenance. 1. Extend the component rail until the component rail release latch clicks (1). 2. Hold down the component rail release latch (2) and completely remove the component rail from the sliding rail assembly. NOTE: You will attach the component rail to the component before you insert the unit into the rack. 2 1 Figure 4-6: Removing the component rail from the sliding rail assembly 4-10 HP 10000 Series Rack Reference Guide
Installing Components
4-10
HP 10000 Series Rack Reference Guide
Preparing the Sliding Rail
Components mounted with this type of rail are designed for frequent accessibility
and/or maintenance.
1.
Extend the component rail until the component rail release latch clicks (1).
2.
Hold down the component rail release latch (2) and completely remove the
component rail from the sliding rail assembly.
NOTE:
You will attach the component rail to the component before you insert the unit into
the rack.
2
1
Figure 4-6:
Removing the component rail from the
sliding rail assembly