HP 11-p100 x360 Convertible PC model numbers 11-p100 through p199 Maintenance - Page 31
Removal and replacement procedures for Authorized Service Provider parts
View all HP 11-p100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5 Removal and replacement procedures for Authorized Service Provider parts CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures This chapter provides removal and replacement procedures for Authorized Service Provider only parts. There are as many as 76 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Bottom cover Description Bottom cover Rubber Kit (includes 2 rear rubber feet) Spare part number 829865-001 820515-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Position the computer upside-down. 2. Pry the two rear rubber feet off the bottom cover (1). Component replacement procedures 23