HP 11-p100 x360 Convertible PC model numbers 11-p100 through p199 Maintenance - Page 37
Reverse this procedure to install the WLAN module
View all HP 11-p100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. Component replacement procedures 29
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Component replacement procedures
29