HP 11-p100 x360 Convertible PC model numbers 11-p100 through p199 Maintenance - Page 44
TouchPad, Remove the TouchPad
View all HP 11-p100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TouchPad Description TouchPad (includes bracket and cable) Spare part number 820517-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the battery (see Battery on page 34). Remove the TouchPad: 1. Disconnect the TouchPad cable from the system board by lifting the ZIF connector (1), and then removing the TouchPad cable from the system board connector. The cable is held in place with adhesive. 2. Remove three Phillips PM2.0×2.0 broadhead screws (2) that secure the Touchpad to the computer. 3. Remove the EMI tape from the TouchPad. 4. Lift and remove the TouchPad (3) from the computer. Reverse this procedure to install the TouchPad. 36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts