HP 11-p100 x360 Convertible PC model numbers 11-p100 through p199 Maintenance - Page 42
Battery, WARNING
View all HP 11-p100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Battery Description Embedded 3 cell, 43 Wh, 3.82 Ah, prismatic battery pack Spare part number 787520-005 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery. 6. Disconnect the speaker cable from the system board and release the speaker cable from the clips on the battery. See Speakers on page 32. Remove the battery: WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. 1. Remove the four Phillips PM2.0×7.0 screws (1) that secure the battery to the computer. NOTE: The battery is also held in place by a fifth screw that was removed when the bottom cover was removed. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts