HP 11-p100 x360 Convertible PC model numbers 11-p100 through p199 Maintenance - Page 40

Speakers, Remove the four Phillips PM2.0×6.0 broad head screws

Get HP 11-p100 PDF manuals and user guides View all HP 11-p100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 794298-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery. Remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Release the speaker cable (2) from the clips on the battery. 3. Remove the four Phillips PM2.0×6.0 broad head screws (3) that secure the speakers to the computer. NOTE: Make note of the rubber gaskets (4) that fit around each screw. For installation, make sure the gaskets are properly installed. 32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cable)
794298-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
5.
Disconnect the battery.
Remove the speakers:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Release the speaker cable
(2)
from the clips on the battery.
3.
Remove the four Phillips PM2.0×6.0 broad head screws
(3)
that secure the speakers to the computer.
NOTE:
Make note of the rubber gaskets
(4)
that fit around each screw. For installation, make sure the
gaskets are properly installed.
32
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts